Custom-Made Plywood Crates

Protect goods and machinery from impact during transportation.

Protect goods from moisture contamination from the outside environment.

When transporting goods by sea, plywood boxes help prevent the products inside from being penetrated by salt water vapor from the outside environment, protecting machinery and equipment contained inside the boxes.

Goods that should be transported in plywood boxes: Machinery, industrial equipment, electronic components...

Product Code T1
Status Custom Made
Long type of plywood crate
Two-compartment plywood box
High type of plywood crates
Plywood crates containing export machinery
Large plywood box installed on site
Plywood crates stacked on top of each other
Plywood crates assembled at the customer's warehouse
3d drawing of plywood crate 1100 x 1100 mm
Multi-layer stacked plywood crates
Plywood crate storage
3D drawing of plywood box with dimensions
3D drawing of large plywood box
3D drawing of large plywood box with dimensions
Long type of plywood crate
Two-compartment plywood box
High type of plywood crates
Plywood crates containing export machinery
Large plywood box installed on site
Plywood crates stacked on top of each other
Plywood crates assembled at the customer's warehouse
3d drawing of plywood crate 1100 x 1100 mm
Multi-layer stacked plywood crates
Plywood crate storage
3D drawing of plywood box with dimensions
3D drawing of large plywood box
3D drawing of large plywood box with dimensions

Specifications

Overall Size Custom-Made
Material Acacia wood & Ply wood
Safe working load 500 - 2000 kg (as required)
Humidity Under 20% as required
Disinfection according to ISPM-15 standards As required
Stacking Stackable

Usage notes

  • The load and effectiveness of the product must be practically checked according to the customer's needs such as: Can the box withstand the load, can the box be stacked on top of each other, is the box size most optimal when loaded into a container? Are not...

    Customers should order samples or consider carefully before ordering mass production.

    Normally, the size of the tank cavity will be designed in 3 dimensions (length, width, height) with 2 - 5 cm left over for lining material. When ordering Vietnamese Pallet to make this plywood box, please note to provide additional information about dunnage accessories such as foam inserts, insert bars with thick and wide dimensions...

Contact us

    Sales Department


  1. 0988 513 686
    Mr. Nguyen Thanh Đat
  2. 0961 778 192
    Ms. Dang Thi Tue
  3. 0973 830 179
    Ms. Pham Thu Phuong

...